ZippAir Tool USA ZRH-131S 1X Pneumatic Riveting Hammer

SPECIFICATION

Chisel Shank Opening : 0.401 inch (10.2 mm)
Bore Diameter : 9/16 inch (14.3 mm)
Stroke Length : 1-3/8 inch (35 mm)
Blows Per Minute : 2850 B.P.M
Operating Air Pressure : 90 PSI (6.2 bar)
Avg. Air Cons. : 6.4 cfm (180 l/min)
Net Weight : 1.9 lbs (0.86 kgs)
Min. Hose Size : 3/8 inch (10 mm)
Rivet Size : 1/8 Steel
Rivet Size : 5 inch (32 mm)

Applications

Precision Aircraft Skin Fastening: Drives small solid rivets into thin aerospace skins, fairings, and leading edges without surface dimpling.

Delicate Sheet Metal Assembly: Sets light solid and semi-tubular fasteners in aluminum panels, electronics enclosures, and avionics chassis.
Confined Space Riveting: Fits into cramped structural bays, instrument panels, and tight bulkheads where larger rivet guns cannot maneuver.
Light Assembly & Prototype Work: Delivers rapid, high-cycle tapping for precision metalworking, ductwork, and small-gauge structural fabrication.

Description

The Zipp Air Tool USA ZRH-131S 1X Air Riveting Hammer is an ultra-lightweight, high-frequency pneumatic tool designed for precision fastening in aerospace, electronics, and fine sheet metal manufacturing. Featuring a 1-3/8" (35 mm) short stroke operating at a rapid 2,850 blows per minute (BPM), this 1X-class rivet gun delivers rapid, light-impact energy tailored to set solid rivets up to 1/8" steel and 5/32" aluminum without distorting delicate workpieces.

Built with an industry-standard 0.401" (10.2 mm) shank opening, the ZRH-131S accepts all standard rivet sets, flush dies, and retaining springs. Its 9/16" (14.3 mm) precision-honed bore and progressive teasing trigger allow the operator to feather the throttle smoothly from gentle seating to full driving speed. Weighing just 1.9 lbs (0.86 kg) with an air consumption of 6.4 CFM at 90 PSI, this compact riveting hammer provides effortless maneuverability and minimizes hand strain during continuous production runs.